Bamboo Wooden Drawer Divider, Set of 4 | Adjustable Organizers & Dividers | Eco Friendly | Expandable & Spring Loaded | Works in Kitchen, Dresser, Bathroom, Bedroom, Desk, Baby

Product Information

Most kitchen drawers are less than 20 inches from front to back, so a 4-foot board will yield two dividers. Mineral oil is immediately food safe once applied and leaves a clear finish that protects against moisture, making it ideal for this application. To do this, rout 1/8-inch dados into the dividers following the same method used to rout the original dados.

Wooden Drawer Divider - Etsy UK

To further divide the drawer and create slots for small kitchen tools such as measuring spoons and corkscrews, you may consider adding dividers that further divide each slot by running side to side.Optional) If you are using a crossing divider at the front or the end of the drawer to stabilize the long dividers, cut the same 2″ long slits at the very end of the long dividers, on the same side of the board as the previous cuts.

Drawer Organisers - Drawer Dividers - Plate Stacker - IKEA

We know how difficult it is to organize those baby onesies, undergarments, and other small miscellaneous items about the house. Between these DIY drawer dividers, my custom pegboard drawer organizers and my rotating utensil holder, I think I have the utensil clutter conquered. These should not go all the way through the wood and should be about ¼” thick (the same thickness as the plywood). Note that the materials listed above are meant to serve as a guide and the dimensions and quantities may need to be adjusted to fit your drawers and specific needs. Remove all boards and sand until smooth using 120-grit sandpaper, then following up with 220-grit sandpaper.Best of all, these dividers require no fancy joinery or permanent mounting and can be customized for years to come, so you’re not stuck with whatever layout you choose on day one. Cookies collect information about your preferences and your devices and are used to make the site work as you expect it to, to understand how you interact with the site, and to show advertisements that are targeted to your interests. The drawer dividers will consist of a front and back board made from 1/2-inch-thick poplar and thin dividers made from 1/4-inch-thick poplar. You will probably need to get out the glue and nails… you can find a great tutorial to make them HERE.

Wood Drawer Organizer - Etsy UK Wood Drawer Organizer - Etsy UK

I didn’t end up organizing it exactly the same way after the dividers were finished, but it was close enough to let me figure out the divider spacing. So check out our different drawer organizers below to see what we’re talking about and get organizing! Clamp a straight board across the two 1/2-inch boards using the distance of your router base for spacing. Cut dividers from ¼” plywood that are 3″ wide and the same length as the drawer (in my case, I needed 2 of these). Use our kitchen drawer dividers adjustable capabilities to your advantage and tap into your drawer’s full potential with our expandable drawer dividers bamboo structure.They come in a variety of shapes and sizes to perfectly accommodate your drawer dimensions and home decor. Use a jig saw to cut 2″ slits in the crossing dividers where they will cross the lengthwise dividers. Use a jig saw to cut 2″ slits in the lengthwise dividers where you want the crossing dividers to go. Deane Biermeier is an expert contractor with nearly 30 years of experience in all types of home repair, maintenance, and remodeling.

Custom Wood DIY Drawer Dividers - From House To Home Super Easy Custom Wood DIY Drawer Dividers - From House To Home

In my case, the spaces that I wanted were the same all the way across the drawer…so I ended up using a really easy method for creating the dividers that doesn’t require any glue or nails. Refrain from cutting additional material off to improve the fitment of the dividers until after they've been sanded and finished. Install a 1/4-inch straight cut bit in your router set to a cutting depth of 1/4 inch, then measure the distance between the edge of the bit and the edge of the router base. I love drawer dividers…they give everything in the drawer its own place and make it all easy to find.This is where I share decorating tips and easy DIY projects with lots of color and a little bit of glam. You could also create one of these for the front of the drawer if you need it…in my case the middle divider was close enough to the front that a third one wasn’t really necessary.