Solvent Weld White 40mm (43mm) Waste Pipe Swept Bend - Pack of 2

Product Information

Our Solvent Weld Waste Pipe from leading brand Hunter is designed for secure jointing with solvent cement and is extremely durable, as well as being impact resistant. Don't know about IKEA sink fitting (I know a lot of their kitchen cabinets etc, can be "odd" sizes -- hopefully that doesn't extend to their plumbing fittings though! Please note some large filters can be despatched direct from suppliers and will not be subject to the pallet charge and this will be calculated at checkout.

but any standard kitchen sink trap will usually come with compression fittings to connect to your waste, so nothing extra should be needed as long as existing pipe is in the right place and doesn't need to be extended or moved at all. This must be reported to us within 48 hours and you may be asked to provide proof of the damage before we can arrange a replacement or refund. Solvent weld a 43mm waste pipe to traps from the sink, shower, washer or more, to create secure wastage systems.Thinking about it, you could probably get away with gluing a 45 conversion bend into the end of that 45, (will need to clean it out before gluing new bend in), point it downwards into the gulley and cut the grating to suit. Ensure plumbing systems run smoothly with our huge selection of air admittance valves, overflow pipes, waste pipes and more.

I naively thought a simple replacement would be suitable however since found that the joint is solvent weld and has an outside diameter of 43mm rather the standard 40mm. solvent weld fittings, but you'll need to cut back, (cant work out if it been painted or not, if it has then you'll need clean the paint off first before trying to glue anything. Idiots whoever installed it, a small hole in that grate and the 45deg could have been pointed straight down into the gulley.mm fittings and pipe 20 mm fittings and pipe 25 mm fittings and pipe 32 mm fittings and pipe 36 mm = 1.

New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging . It is the perfect choice for anyone who is looking for a high-quality, reliable, and easy-to-use slide valve. I have noticed on a new bag of plumb bends that they are marked ABS 40mm, on the fittings in the bag 43mm (11/2) they are however listed as 32 and 40 and sold as such. DX are one of only a handful of companies that offer this service and have the correct insurances and licences in place to handle live animals.The fact is that the actual OD size [as opposed to the nominal size] has changed from 43mm to about 41. At the moment this differs from the network of pallet couriers used so has to be resolved on a case by case basis. My outside waste pipe from the kitchen sink has a 90degree joint that has cracked and causing the waste to leak before reaching the main drain.